TV0.5XC microscope interface installation instruction manual

The TV0.5 XC microscope interface is a low magnification microscope digital camera system adapter that ensures that the camera system can capture a wider microscope image, 2/3" CCD with 0.5XC interface, field of view 22, and the naked eye The size of the image observed through the microscope is such that it guarantees WYSIWYG - almost all microscopic image camera systems observed by the naked eye can be shot in time, and the same size CCD, if connected to the 1X video interface, can only Take about half of the image in the middle of the microscope.

installation steps:
1. Connect the TV0.5XC microscope interface to the C port of the imaging unit

2. Mounting the TV0.5XC microscope interface together with the imaging device to the appropriate optical path exit of the microscope;

3. Adjust the microscope, observe the microscopic image in the field of view of the eyepiece until it is clear, and then see if the image in the display is clear. If the eyepiece is not synchronized with the digital display, loosen the screw indicated as “LOCK”, then adjust the indication up and down. Use the “Focus” screw until the video image is clear, and finally tighten the screw labeled “LOCK” to ensure that the eye view is basically synchronized with the video display.

In special cases, no matter how the position of the “Focus” screw is adjusted, the eye observation will not be synchronized with the video display. Please contact your local dealer or call us.

Number of fields of view observed when CCDs of different specifications match TV0.5XC:

AROMA DIFFUSER

JIANGMEN EASY TECHNOLOGY CO.,LTD , https://www.easylife-tech.com