Feeding Weaned Piglets Should Be "Three Looks"
When you look at the feeding situation, feed the piglets immediately and check the feed intake to see if there are any leftovers in the feed tank. If there is only a little scrap at the end of the tank, no small piles of powdered or pelleted feed are found, indicating that the amount of feed is moderate; if the feed tank is seen to be clean and moist, indicating that the amount of feed is insufficient, the amount of feed should be increased appropriately next time. If there are leftovers in the tank, it means that the feeding amount is excessive, and the amount should be reduced as appropriate.
Second, look at the defecation situation to carefully observe whether the piglet defecation is normal, and adjust the feeding amount according to different situations. The feces of piglets within 3 days after weaning are coarsely thinned and turned from yellow to brown. This is a normal phenomenon (observation of defecation time is generally at 12-15 o'clock per day). If the feces becomes soft, the oil shines, and the color is normal, the dosage does not need to be changed; if there is a small amount of sporadic feces in the circle, there are feed particles, indicating that some pigs have overslaught, and the next feeding should be reduced by 20 % or so; if found feces paste, light gray, and sporadic yellow, there is undigested feed, this is a sign that the whole litter of piglets diarrhea, should stop eating.
Third, look at the activities of the situation to observe whether the piglets are healthy and lively, and determine the feeding amount accordingly. Before the feeding piglet hears the sound of the piglet swarming in front of the trough, if the cry is hungry, it can feed more feed; feed about 10 minutes, the feed in the trough is snatched up, the piglet does not return to the nest, and the piglet is crowded and looks around the trough. It shows that the feeding is insufficient and can be fed again; the piglet does not respond much to feeding the feed, and the call is small and weak and does not panic, indicating that it is not hungry and can be fed less.
Medical Grade Injection Maker is a medical parts injection making machine, can make injection parts, plastic parts with a special design pattern. With a strong mold design capacity, we combine parts-making and mold making together, try our best to offer the good quality parts for your quests.
Injection parts with medical grade materials from PP, PVC, ABS and others, can assembled onto urine bag, positive drainage system or negative drainage from some parts, such as open jaw slide clamp, Embedding Cassettes to some drainage container.
Silicone Drainage Evacuator,Silicone Mold Making,Injection Mold Making,Urine Bag Plastic Parts
Huali Technology Co., Ltd , https://www.jlhualitech.com