Description of the operation steps of the body packaging machine

The body packaging machine is a vacuum packaging machine that is very popular among consumers. The body packaging machine adopts vacuum packaging technology to put the product into a packaging bag or a container, and when the vacuum degree in the bag reaches a preset index, the packaging bag is sealed. The vacuum packaging process of the body packaging machine works for a short period of time, the packaging production rate is high, and the shelf life of the food is extended to achieve the purpose of long-term storage.

We can briefly divide the operation of the body wrapper into two steps:

When the power is turned on, we can dial the power selection switch according to the demand (the vacuum sealing is when the switch is directed to the vacuum, and the vacuum inflation is the vacuum inflation sealing), which can be selected according to the requirements. After that, the plastic bag containing the articles is placed in the vacuum chamber, and the bag mouth is placed on the heat seal strip to cover the gas nozzle.

Close the cover, the vacuum indicator on the panel becomes brighter, and the vacuum pump starts to pump air. At this time, the vacuum degree can be adjusted according to the packaging requirements (the scale is from low to high, the adjustment is small), and the vacuum packaging is required after the request is reached. The pumping is actively completed, the indicator light is extinguished, and then enters the heat sealing inflation stage. When inflated to the set time, the opening is sealed (the heat sealing time is set on the control panel, the rotation amplitude is small). At this stage, when the pre-alignment time is reached, the heat seal indicator is extinguished and the heat seal is completed.

After the operation described above is completed, the vacuum chamber of the body packaging machine automatically turns on the air, and the cover is lifted to complete the vacuum packaging process. The body packaging machine should control the adjustment range during the vacuum packaging process, and avoid opening and closing the joint to avoid burning the heat sealing accessories.