Emulsified mixing tank heating method
The emulsified mixing tank and the mixing tank lid can be flanged or welded. The mixing tank and the stirring tank lid can be used to open the feed, discharge, observation, temperature measurement, pressure measurement, steam fractionation, safe venting and other process tube holes according to the process requirements. A transmission device (motor or reducer) is arranged on the upper part of the mixing tank cover, and the agitator in the stirring tank is driven by the transmission shaft. The shaft sealing device can be in various forms such as machine seal or packing, labyrinth seal, etc. (according to user needs).
Emulsified mixing tank features:
1. All-round frame type scraping wall mixing paddle adopts frequency converter speed regulation. It can produce high-quality products of different processes according to customers' requirements. It can cater to the shape of the stirring tank at any time, sweeping the wall wall adhesive material, without stirring dead angle, no Sticky pan.
2. Diversified high-speed homogenizer, strong mixed solid and liquid raw materials can quickly dissolve insoluble materials such as AES/AESA/LSA in liquid washing production, saving energy consumption and greatly shortening the production cycle.
3. The pot body is welded with three layers of stainless steel plates. The jacket is electrically heated as a heat source. It has the characteristics of large heating area, high thermal efficiency, uniform heating, short boiling time of liquid material and easy control of heating temperature. The outer layer is equipped with polyurethane foam insulation and anti-scalding. The tank and pipe are mirror polished and fully comply with GMP requirements.
4. The process of claim emulsification tank heatable stirred tank and cooled material, there are two kinds of electric heating and steam heating.
5. It is convenient to discharge, and can be directly discharged or configured to discharge the pump. The gear pump circulation discharge device can speed up product forming and quick discharge.
6. The material contact part is made of SUS304 or 316L stainless steel material, so that the product meets GMP regulations.
7. The main mixing of the emulsified mixing tank adopts the variable frequency shifting device to reduce the formation of bubbles when the temperature is low and the consistency is high.
8. The upper platform mode can be used on the front or side platform.
9. The discharge port to the ground can be selected to require height requirements.
10. The temperature, time and stirring speed of the material heating can be set as desired.
11. Stainless steel electric control cabinet can fully monitor equipment operation, and can display data such as temperature, stirring speed and emulsification time setting.
The emulsified mixing tank is made of centrifugal force generated by a high-speed, powerful rotating rotor, which breaks the material from the radial direction into the narrow and precise gap between the rotor and the rotor, and is subjected to centrifugal extrusion, impact and other forces to disperse the material. Mix and emulsify. The machine has the advantages of compact structure, small size, light weight, easy operation, low noise and stable operation. The emulsified mixing tank has the characteristics of large size, which is not grinding medium in the production process, and is characterized by high-speed shearing, dispersion and homogenization. Mix and break together.
Active Pharmaceutical Ingredients
Refers to the raw materials used in the production of various preparations, and is the active ingredient in the preparations
Various substances prepared by chemical synthesis, plant extraction or biotechnology are used as medicinal powders, crystals, extracts, etc., but cannot be directly taken by patients.
And the drug in powder, crystal, and extract state is processed into administration forms (such as tablets, capsules, injections, pills, ointments, etc.) that are convenient for patients to take, and these administration forms are called drug dosage forms .
Our company can provide various raw materials, anti-cancer raw materials, fitness raw materials, liquids, Cosmetic Raw Materials, Weight Loss Raw Materials, food additives, plant extract powders, aphrodisiac raw materials, hair loss raw materials, Vitamins, etc.
Nootropics Powder,Clenbuterol Hcl,Hair Loss Treatment Powder,Active Pharmaceutical Ingredients
XI AN RHINE BIOLOGICAL TECHNOLOGY CO.,LTD , https://www.rhinebioteches.com