Flammulina velutipes requirements for environmental conditions

1. The temperature of Flammulina velutipes has different temperature requirements for each growth stage. The temperature range of mycelium growth is 3～34°C, the optimum temperature is about 23°C; the temperature required for fruit body differentiation is 10～15°C, and the most suitable temperature is 12. At ~13°C, the primordium can grow in the range of 10-20°C. Above 23°C, the primordium will shrink and disappear. The temperature required for the normal growth of fruiting bodies is 5 to 20°C, and the optimum temperature is 8 to 12°C. Short-term suppression treatment of cold wind at 4°C after the fruiting body occurs can cause neat mushroom to occur neatly and mushroom shape to be round.
2. Moisture Flammulina velutipes mycelium growth stage requires the moisture content of the culture material in the 60% to 68%, practice has proved that according to the different texture of the culture material, properly increase the moisture content of the culture material, can play a certain role in increasing production. If the moisture content of the culture material is less than 50%, the growth of the mycelia is sparse and the structure is not good; if the moisture content is higher than 75%, the ventilation is poor and the mycelium grows slowly or stops growing. The optimum water content of the fruiting body is 65%, and less than 50% of the fruit body will not be formed. When the primordium differentiation, the relative humidity of air is maintained at 80% to 85%; the development stage of fruiting bodies requires a relatively high relative humidity of the air. In addition to relying on its own water to meet the growth and development of the mushroom, the relative humidity of the air should be increased to 85%. 95%.
3. Flammulina velutipes is an aerobic fungus. It must have sufficient oxygen supply to grow normally. Therefore, sufficient oxygen is needed for the mycelial growth stage and fruiting body development stage. Otherwise, the mushroom grows slowly, the stem is slender, and the cap is not formed. , into needle mushroom. The fruit body of Enoki mushroom is very sensitive to the concentration of carbon dioxide in the air. When the carbon dioxide content exceeds 1%, the growth of the cap is inhibited. When it exceeds 5%, the fruit body cannot be formed.
4. Light Flammulina velutipes is a genus of bacilli, mycelium can grow normally under dark conditions, and the primordium can also be formed under complete darkness. During the growth stage of fruiting bodies, certain scattered light has a promoting effect on the formation of fruit bodies.
5. Acid-base Flammulina velutipes requires a weakly acidic medium, which can grow normally in the pH range of 3 to 8.4. During the growth stage of mycelium, the optimum pH of the culture medium is 4 to 7. In a certain pH range, the partial alkali of the culture medium will delay the occurrence of fruit bodies, and the slightly acidic culture medium will have strong mycelium growth. The fruiting body produced the most rapid pH at pH 5-6, and the pH in the culture medium was lower than 3 or higher than 8. The mycelium stopped growing or fruiting bodies did not occur.

Manual Delivery Table

1. Import hydraulic system

2. Memory sponge mattress

3. Electric Longitudinal displacement ≥350mm

4. Tabletop is X-ray available

5. Optional Carbon fiber bed panel

This Manual Delivery Table is widely used in operating rooms of hospital and clinics. It is suitable for surgery operations on body part

like purposes head, neck, chest and abdominal cavity, perineum and extremities for surgery, obstetrics and gynecology, ENT, orthopedics

and other surgical operations.

The Manual Delivery Table can be flexibly adjusted by the foot pedal pump and manual hand wheels. Adjustments include waist bridge lift,

head board folding up and down, Backboard folding up and down, leg board folding down, tabletop lean left and right, tabletop lead forward

and backward .

Material of the whole structure is made of 304 stainless steel.

Certificates:

Certificates of CE, ISO9001, ISO13485, CFDA are approved.

Our company

Shangdong province is the main machinery production base in China. 

KANGERJIAN Medical Technology Co., Ltd. is a group of senior lighting  design expert and machinery manufacturing expert company with 20years experience and factory locating in the east city--the hometown of confucius--Qufu in Shandong province, China.

 

The Company has passed the ISO:9001:2008 quality system certification, ISO13485:2003 quality system certification, CE certification and CFDA certification, so that the enterprise management standards and product quality is relatively connected to expand the international market for enterprises to lay the foundation.

Our main products:  Operation Theatre Lights ,  Halogen Operating Light ,  LED Operating Light ,  Double Dome Operating Lamp ,  Single Dome Operating Light ,  Surgical Table , Medical Electric Operating Table, Electric Hydraulic Operating Table,  Obstetric Delivery Table , Gynecology Examination Tables,  Economical Gynecology Table , Electrical Gynecological Table,  Operating Theatre Pendants , medical hanging tower, ICU tower crane in ICU room, LED Viewbox etc. medical equipment.

 

The quality of casting by me, the market led by me! Excellent from professional, KANGERJIAN people lead the new trend of medical equipment.

KANGERJIAN Team

Package:

Inner Package---Dust-proof plastic film+ qualified shockproof foam

Outer Package---Thick Plywood case for over sea delivery

We support ODM of the package if there's special demands from clients

Shippment:

Sea shipping, Air transportation, Expresses like DHL, UPS FEDEX, TNT etc. Our forwarder give good price support.

Clients also can choose their own forwarder.

Manual Delivery Table

Manual Delivery Table,Obstetric Delivery Bed,Manual Gynaecology Delivery Table,Manual Multifunction Delivery Table

Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjian-medical.com