Hefei big honey pill machine price how to operate
2020-10-22 13:18:43
Introduction of Damei Pill Machine:
      Damai Pill Machine is suitable for small pharmaceutical factories, large and medium-sized pharmaceutical factory trial rooms, Chinese medicine research institutes, hospitals, private clinics, Chinese medicine stores, and valuable tonic products on-site processing and sales points. The whole machine is made of stainless steel and conforms to GMP standards. And small size, low power consumption, high efficiency, low noise, no pollution, simple operation, safe and reliable. When mixing the powder, it should be noted that the Chinese medicine is a non-sticky material . It is necessary to add a certain proportion of medicinal excipients . When making the pills, the viscosity of the medicine surface should be moderate , prevent it from being too soft or too hard , and stir it so that it is not sticky.
Big honey pill machine technical parameters:
â—†Pilling specifications: 3, 6, 9 grams
â—† Motor speed: 1440 rev / min
â—†Working speed: 15 rpm
â—†Production: 10-30kg/h
â—† Power : 0.28KW, electric heating: 1KW
Big honey pill machine manual :
First, matters needing attention
1, in operation a large pill pill machine, please read this entire manual, and should be retained for future reference.
2. Any modification that has not been approved by the authority may not operate the pelletizer.
3. Any modification that has not been approved by the authority shall result in the inability of the pelleting machine to operate , and the responsibility shall be borne by the user.
4, secure pelletizer on the table, countertop no other related items, aside prohibited pull wire, to prevent mechanical or other accidents broke. The pill machine can be adjusted to a smooth bottom.
5. When the pill machine is finished , please cut off the power of the pill machine.
6. Do not overload the pill machine socket , otherwise it will cause fire or motor damage.
7. Do not put foreign objects and hands into the working pelletizer (contact the pelletizing shaft) to avoid causing crushing or damage to the pelletizer.
8. Do not remove the cover while working to avoid injury or damage to the rolling pill machine.
9, before the working class, in the respective hole in the pellet mill drip addend (anhydrous edible oils).
10. A dedicated power cord must be used . If the power cord is damaged , go to the local office maintenance department to purchase and replace it.
11. This machine is suitable for ambient temperature of 5 to 40 degrees , relative humidity of 90%, grid voltage of 220V/50HZ, and good grounding of power input.
12. If the material is stuck and the motor does not work , please turn off the power immediately and remove the stuck material before working.
13. When the machine is not in use, put it in a dry, clean and ventilated place.
Second, accessories
name | specification | Number of accessories | Remarks |
Heating plate | 80mm × 105mm, 1kw | 1 | Available at various offices |
power cable | 0.75 2 mm × 1.8m | 1 | |
1.5 2 mm × 1.8m | 1 | ||
tray | 270 × 200mm | 1 | Daily necessities |
brush | 1 | 1 | |
Allen wrench | M8 | 1 | Standard Parts |
Water sprinkler | 0.5kg | 1 | Daily necessities |
Â
Third, the structural characteristics
1. This machine is composed of pressing cake shaft, delivery shaft, pelletizing shaft, motor, coating device, heater, electrical appliance and other components.
2 , a multi-purpose machine , easy to remove and wash.
3 , small size.
4 , light weight.
5 , stable performance.
6 , easy to operate.
7 , low noise.
8 , beautiful shape.
9 , easy to clean.
10 , safe and energy saving.
11. The parts in contact with the drug and the outer casing are all made of stainless steel and comply with GMP standards.
12 , pill reference formula:
1. The medicine is dried and processed into a powder , and the fineness is 80-100 mesh , and the medicine such as rehmannia is repeatedly twisted several times to reach the mud paddle by the method of the meat grinder.
2, medicine powder, rice soup (rice simmered into porridge , remove the rice viscous liquid is rice soup) , honey, a small amount of dextrin (the ratio of medicine and honey is 10 : 1, rice soup amount) , stir into a dough. Special attention: the viscosity of the powder should be moderate , not too soft or too hard to stir evenly and not sticky.
3, dextrin must be added with water into a paste , must be stirred with a spoon when tanning.
4. It is strictly forbidden to add cooking oil to the shot shaft during use , otherwise the stick knife will not fall off easily.
Â
Fourth, the operating instructions
1. Before starting the machine, remove the upper cover (as shown), add a few drops of anhydrous cooking oil to each oil hole, and wash the roller and the contact with the drug with medical alcohol to remove oil and disinfect.
2 , the drug is dried into powder to achieve 80-120 mesh, the matching crushing equipment can use the factory flow mill or 200-500 g rocking mill.
3 , honey according to the nature of the prescription Chinese medicine powder, refined into a suitable degree of refined honey.
4 , the pellets are also known as medicine, the mixture of the uniform powder and the appropriate refined honey into a soft and hard, plastic large pellets.
5. Pelletizing: The mixture is kneaded into a cylindrical shape and vertically put into a pressing cake tank, and the cake is pressed, and the cake-like medicine is put into the trough. The formed strips are taken out, and the medicine strips are placed one by one in the pellet-making tank, and the pellets are made into pellets.
6. Coating: After the pills are made, put them into the coating machine, and put them into the coating body to form various outer garments.
7. Polishing: After the pellets are made, put them into the coating machine and roll continuously. The rolling time is long and the surface is smoother.
8. Drying: After the pill is made, put it into the coating machine, turn on the heating power supply and the outer garment to dry. (It can also be dried with a hair dryer or dried in a ventilated place)
9. Water pill: Put the medicine surface into the water pill coating device, gradually put it into the rice soup, form the granules, and then spray the water at intervals, and gradually form the pill.
10. When the coating device is not in use, screw out the black screw on the clutch near the coating device, and the coating device can be directly removed (for reuse, after the coating device is installed, the screw must be tightened and pulled in the coating device. Use it if it is not used).
11. After use, remove the roller to clean the roller and install it back.
12 , the surface and interior of the equipment must be kept clean and dry.
Five, common faults and troubleshooting methods
Common faults of this machine | cause | Method of exclusion |
The power must be turned off to perform the following operations | ||
1. After the machine is powered on, the motor does not rotate. | 1. The power cord is not in good contact or the power plug is loose. 2. Poor contact in the switch. | 1. Repair the power supply or change the plug of the same specification. 2 , repair or exchange the same size switch |
2 , when the mechanism of the pill, the shaft knife rotates or the medicine surface sticks | The discharge baffle is loose, and the distance from the bottom of the shaft knife is not able to scrape the pill from the shaft sipe. | Adjust the distance to the bottom of the zui of the discharge baffle (about 0.1mm) and tighten the fixing screws. |
3. When the unit is working, the motor stops rotating suddenly. | 1 , capacitor short circuit 2 , the gear is stuck | 1. Go to the local office maintenance department and have professional maintenance. 2 , check the gear groove for debris and clean it |
4. When the machine is working, the shaft cutter has a slight jump. | Loose screws above | Open the top cover and tighten the 6 hex screws evenly |
5. The machine generates abnormal noise during operation. | 1. The shaft knife and the friction part of the body are dry and oil-free. 2 , no oil between the teeth | 1. Inject a few drops of clean cooking oil into the oil eye. 2 , a small amount of edible butter in each gear groove |
6 , the heater fails to heat | 1. The plug is loose or the power cord is off. 2 , heater heating wire is blown | 1 Replace the same size plug or repair the power socket 2 , to the local office maintenance department, repaired by professionals |
If you want to know more about the big honey pill machine , please log in to our company :< > Or direct pharmaceutical technology department : <> consulting, our factory will provide you with more professional services!
Ningbo DOKEE Medical Technology Co., Ltd. , https://www.dokeemedical.com