How do manufacturers choose chillers?
How to choose the manufacturer - chiller - industrial chiller - wind / water chiller has a lot of open plastic products factory, or friends who need chiller to cool the machine with circulating water and circulating oil, when buying industrial chillers, often I don't know what type of chiller I can use to achieve my desired cooling effect, or I don't know what kind of machine is more suitable for my production workshop.
Dongguan Tiande Machinery wants to tell you some simple selection methods. I hope I can help my friends.
First of all, we have to figure out which types of chillers are divided: the average manufacturer will produce both water and air cooling.
The air-cooled chiller contains a heat-insulating water tank and a water pump in its body, eliminating the need for an additional cooling tower to dissipate heat. Installation and movement are very convenient. However, it requires a high working environment. First, because it is cooled by hot air circulation. Therefore, if the ventilation effect of the installation workshop is not good, it will directly affect the cooling effect of the chiller. In addition, if you want to put the chiller in a dust-free workshop with humidity requirements, then I advise you to modify the water cooling. Because the air-cooled chiller will spray water vapor on the top of the machine to dissipate the water-cooled chiller, it can be divided into open type, sealed type called box type and screw type. First of all, water-cooled chiller It is necessary to additionally install a cooling tower and a water pump to extract hot water to dissipate heat.
The open chiller has to be equipped with a separate water tank. The seal type is not necessary because it has a built-in water tank. The open type is usually installed somewhere outside the workshop. It is easy to repair, but because it is not beautiful, it is A sealed water-cooled chiller is produced, because it is a box structure, so it is popular. But if you have a very large demand for cooling capacity, you should use a screw chiller. At this time, we generally Will be called a chiller,
Most manufacturers, if you have a chiller compressor requirement of 50HP or more, they would recommend a screw chiller.
I hope that the small methods mentioned above can help my friends who are worried about this.
The Operating Table use manual hydraulic control;Full set of hydraulic control system for hydraulic lock protection, low noise,high safty and reliability;This Surgical Table is divided into a plurality of movable segments;Operation table base with fixed or mobile, mobile and flexible, reliable fixation; The table is divided into several movable segments: head plate, back plate, seat plate, leg plate. Back plate is composed of shoulder and kidney (optional). All sections adopt transmissive X-ray material, the plate below is a cassette rail, which is used for cassette radiography.
Manual Hydraulic Operating Table
Manual Hydraulic Operation Table,Manual Hydraulic Ot Table,Manual Hydraulic Surgery Table,Manual Hydraulic Surgical Table
Shandong Lewin Medical Equipment Co., Ltd. , https://www.operatinglight.nl