Guangrui bamboo shoots pasteurization machine use life-saving introduction welcome to purchase sterilization equipment
Pasteurization machine product structure and features:
The tank plate is made of food grade stainless steel SUB304, and the conveying part is made of stainless steel mesh belt. It is safe, reliable and pollution-free, and meets food safety requirements. Smooth delivery, adjustable speed, simple structure and easy maintenance. It also consumes less energy and uses less energy.
The pasteurization equipment uses water as the sterilization medium, and is divided into two parts: a sterilization section and a cooling section. It heats up quickly and is clean. It is also equipped with a circulating water pump for extracorporeal circulation. The automatic temperature control adopts automatic device, which is safe and reliable. There are insulation layer, frequency conversion motor, frequency control. The heat source is boiler steam, which is especially suitable for continuous sterilization.
Bamboo shoot pasteurization machine equipment lubrication: 1. Transmission motor reducer * times every three months to change the lubricant after half a year to change the lubricant, should be injected N320 ~ N460 lubricant to the oil mark center point, and take off the ventilation Small cone plug on the device. 2, each grease nozzle needs to inject high-speed lubricant every fifteen working days.
Sauce pickling pasteurizer equipment installation: equipment installation is also required, as follows: 1, in accordance with the mechanical equipment installation and acceptance of the relevant specifications, do a good job installation and installation, to ensure that the installation is stable, reduce vibration, avoid deformation, Guarantee machining accuracy and prevent unreasonable wear. Before the installation, technical supervision should be carried out, and the construction personnel should carefully study the relevant technical materials of the equipment to understand the equipment performance and safety requirements and the construction requirements. 2. During the installation process, the construction of the foundation, assembly links, electrical lines and other projects must be carried out in strict accordance with the construction specifications. If there are special requirements such as constant temperature, shockproof, dustproof, moisture proof, fireproof, etc. in the installation process, measures should be taken, and the construction can be carried out after the conditions are met.
Zhucheng pasteurization equipment operation instructions
Preparation for operation: 1. Please close the main power switch. 2. After the main power is turned on, the power indicator will light to remind you of the power. 3. If the power indicator is not lit after the main power is turned on, please change the main power 380v two-phase power line. 4. After the power is turned on, please test the equipment after a period of trial operation. 5. Check that the motor is reversing, the cooling fan and the pump are reversed during operation.
Precautions and maintenance knowledge of the pasteurization line equipment: 1. Items that must be inspected before the equipment is put into operation: In order to ensure safe and smooth operation, it is very important to check before each operation, and it must be checked item by item. Start the assignment. 1. Check the switch box: Make sure that the power cord of the no-fuse switch is loose, and the looseness must be tightened. 2. Regularly check the electrical and motor. Also the pump is not working properly. Note: Please check the electrical power to turn off the total power to avoid electric shock. Check the electrical equipment to avoid unnecessary damage and danger. 3. Confirmation and adjustment of the tension of the chain and mesh belt of each department. 4. Look at the motor reversing, and the motor cooling fan is reversing. If the cooling air is reversed, please replace the cooling fan line on the lower terminal of the distribution box. The motor reverses the motor line below the terminal. One change. Note: If you replace the motor or the pump is replaced, please pay attention to the positive and negative rotation of the motor and the pump and the reverse rotation of the cooling fan. If reverse, change the two ends of the cooling fan terminal in the distribution box. If the motor is not replaced after the motor is replaced, the motor cooling fan is reversed and the cooling fan is reversed, resulting in loss of the motor due to poor heat dissipation.
Adjustment and maintenance of sterilization equipment :
When adjusting, checking, or replacing the following parts, the power switch must be turned off first.
(A). Chain adjustment: 1. Implement after the motor is stopped. 2. Use Guoguang brand #90. 3. Remove the oil plug, the oil just flows out to the appropriate amount, and when it is insufficient, it is added.
(2) Method of long-term placement: 1. The soil and other things attached to each part are washed with water and dried with a cloth.
2. The entangled objects such as the revolving parts, mesh belts, and chains should be completely removed. 3. Each turning part and the friction active part are fully filled with oil to prevent rust. 4. Each chain is fully filled with oil to prevent rust.
Bamboo shoot sterilization machine equipment maintenance
Equipment mesh belt adjustment: 1. After a period of use, the mesh belt will stretch due to the tension. At this time, the mesh belt tensioning assembly bolts can be adjusted and the mesh belt can be tensioned. 2. When the mesh belt stretches too long and the tension is not as expected, the mesh belt needs to be cut off, and one of the belts is removed to re-dock the mesh belt.
Equipment drive chain adjustment
1. If the chain is loose after a period of use, the motor can be tensioned at this time. .2. When the tension chain fails to achieve the desired effect, the chain needs to be cut off, and after removing one of the chains, the chain is re-butted.
Intercom system with tuya is an intercom system that realizes remote operation on the mobile phone. When the customer uses the Tuya Intercom system, the visitor calls his or her friend's apartment on the Video Door Phone system, the traditional intercom mode can only receive calling information on the Indoor Monitor which is in the apartment. But if you uses our intercom system with tuya, the users only need to download the tuya application on their mobile phone and connect with our video door phone , they can receive the visitor's calling information, even if they are in travel, office, etc.,They will receive the visitor's call information at the first time, and intercom with the visitor. If the visitor is their friend or family member, users can also remotely unlock the visitor on the mobile phone, and then visitor can enter the building or house.
Sounds incredible, right? Then let me know more specifications and functions together!
Our Intercom system with tuya uses high-definition screen and a hard aluminum housing with HD cameras. The camera can detect face information and open doors. It is full touch screen , so customers can operate like our mobile phones, which is very simple and convenient. At the same time it compatibles with and face recognition .RFID swipe card.tuya application and so on to open the door . Usually used for renovation of old communities, apartments and hotels, etc.
The following are the parameters of our AZZJ10D for your reference:
1. 10.1 inch 720 HD display TCP/IP Intercom system
2. Calling, intercom, unlocking, monitoring (golden & silver optional)
3. High quality aluminium alloy frosted panel + high-end glass lens + touch screen
4. Digital camera, stable and clear image shooting
5. Night vision and bright light compensation function
6. Full duplex voice intercom, comparable to ordinary telephone intercom
7. Android system ,ARM CPU, TUYA App (support Android and IOS system)
8. LPDDR3 1 GB memory, standard EMMC 8 GB storage expandable
9. RJ45 standard ethernet interface all-digital design
10. Low power consumption technology solution, saving energy and long life span
11. Dimension:348*169*47.5(mm)
12. Install method : Wall/flush install (335*158*47.5 mm)
13. Image/video advertising playback (UI display can be customized)
14. Door opening:IC/ID card/ password/ face recognition/ mobile phone
We have a variety of designs for Intercom system with tuya, different sizes, different keys, etc., you can refer to our pictures,
We have been focusing on independent research and development of intercom system with tuya
since 2011. We have professional reach and devolve team to serve you, and we can provide you with professional products and services, If you need more information about our factory or intercom system, please do not hesitate to contact us, we are very honored to share catalog with you.
Intercom System With Tuya,Tuya Intercom,Video Door Phone System,Tuya Video Intercom
Zhuhai Mingke Electronics Technology Co., Ltd , https://www.mingke-tech.com