What should you watch out for when using a cone crusher?
Precautions when using a cone crusher:
1. There must be a de-ironing device to prevent the crushing chamber from passing through the iron. If the iron is frequently over-exposed, it may cause a shaft breakage accident.
2, to be fully loaded production, otherwise the product size will be too thick.
3, the cone crusher in the work, the feed should be uniform, can not be segregated. If the feeding is uneven, the production capacity will decrease, the product size will be too large, the spring action will be frequent, the bowl bearing pressure will be large, and the power consumption will increase.
4, the oil should be replaced frequently, not too dirty, too dirty will accelerate the wear of gears and bowl-shaped tiles, bushings, and even the bushings die.
5, the drive belt installation can not be too tight, otherwise it will cause the drive shaft to rotate inflexible or broken; it can not be too loose, otherwise it will cause the crusher to suffocate.
6, the feed can not be too wet and too sticky, fine particles can not be too much, can not be too large, otherwise it will cause boring cars. The crushing ratio in the production line should be reasonable, so as to maximize the efficiency of the crusher.
7. The spring pressure should not be too tight. If the pressure is too high, the shaft breakage will occur. If the pressure is too small, the spring will jump frequently, affecting the normal operation of the crusher, and the product size will become thicker. The temperature of the lubricating oil should not be too high or too low, otherwise it will affect the operation of the machine.
Changhong Imp. & Exp. Co., Ltd. , http://www.ly-foods.com