Meiji milk powder was detected
On the 6th, the Japanese food giant MEIJI took the initiative to report to the public that a maximum of 30.8 becquerels of kilograms per kilogram of milk powder was detected in Meiji STEP (850 g) milk powder found on some dates in a company inspection. Radioactive nuclides. Although the figure does not exceed the upper limit set by the Japanese authorities, Meiji has already planned to implement a free replacement of about 400,000 cans of milk powder. According to local Japanese media reports, this is the first time that a nuclear power plant has been detected in powdered milk after the accident. The Ministry of Health, Labour and Welfare of Japan has also been involved in the investigation. A statement on the 6th of the Meiji Japan official website said that the milk powder was found to be sold across Japan. These milk powders are produced at the Meiji Plant in Kasukabe City, Saitama Prefecture. The milk used to make the raw milk powder was produced before the accident at the Fukushima nuclear power plant. The Meiji side suspected that it might have been mixed in the atmosphere when the raw materials were dried. Meiji said that the activity of milk powder after melting it into hot water would be reduced to 3 to 4 becquerels. Even if drinking every day would not affect health, the company is willing to change products to eliminate consumers' doubts.
Stimulated by news, Meiji shares closed down 9.72%. According to reports, the same products as "Meiji STEP" have been exported to Vietnam under other product names. Meiji stated that the person who purchased the affected powdered milk can send the product to the following address and request replacement (submitted by the recipient): 1-5 Meiji Saitama Factory, Nanwon-cho, Kasukabe City, Saitama Prefecture (Postal Code: 3440057). In addition, a telephone number (0120-077-369) was set up in Japan.
On the afternoon of the 6th, a contact person of Meiji Milk Powder stated that the licensed products in the Mainland China market were not affected by the incident. Meiji milk powder that was officially sold in major domestic supermarkets had all been changed to Australia, and had no connection with Japanese milk sources. The regular sales of domestic sales are all in Chinese.
For some people who may purchase online or purchase Japanese version of Meiji milk powder from Hong Kong, the source said that it is difficult to grasp the overseas purchase channels. It is recommended that citizens purchase licensed products for the mainland market because manufacturers will be responsible for their quality.
Bacteria is a rapid and reliable disinfection and sterilization equipment using pressure saturated steam, which is suitable for medical and health undertakings, scientific research, agriculture and other units. Sterilize medical equipment, dressings, glassware, solution cultures, etc. It is also suitable for high-quality drinking water produced by high-altitude food steaming equipment and enterprises and institutions, and can also be used as high-temperature steam source equipment.
The temperature of the steam in the autoclave is not only related to the pressure, but also related to the saturation of the steam. If the air in the autoclave is not exhausted or exhausted, the steam cannot reach saturation. Although the pounds expresses the sterilization pressure, the temperature of the steam does not reach the required height, resulting in failure of sterilization. The presence of air in the autoclave during sterilization can also affect the penetration of steam into the sterilized items. Saturated steam can penetrate into the center of the dressing bag. When the air is not completely eliminated, the temperature inside the bag is low and the temperature outside the bag is high, so that the inside cannot be sterilized.
The method to check whether the sterilizer air is exhausted is to connect a leather tube at the outlet of the exhaust pipe and insert the other end into the cold water basin. If the air discharged from the tube generates bubbles in the cold water, it means that it has not been exhausted. It still needs to continue to exhaust; if no bubbles are generated, it means that the cold air in the pot has been basically drained. If there is a certain amount of steam in the sterilizer before venting, it will help to drain the air.
vertical autoclave,horizontal autoclave,industrial autoclave
Suzhou Escomedical Equipment Co.,Ltd , https://www.escodental.com